Like the charged power suit worn by Black Panther of Marvel Comics, 麻豆原创 researchers have advanced NASA technologies to develop a power suit for an electric car that is as strong as steel, lighter than aluminum and helps boosts the vehicle鈥檚 power capacity.
The suit is made of layered carbon composite material that works as an energy-storing supercapacitor-battery hybrid device due to its unique design at the nanoscale level.
The development appeared recently as the cover story in the journal Small and could have applications in a range of technologies that require lightweight sources of power, from electric vehicles to spacecraft, airplanes, drones, portable devices and wearable tech.
鈥淥ur idea is to use the body shells to store energy to supplement the power stored in batteries,鈥� says study co-author Jayan Thomas, the team leader and a professor in 麻豆原创鈥檚 and .
鈥淭he advantage is that this composite can reduce the weight of your car and increase the miles per charge,鈥� he says. 鈥淚t is as strong as or even stronger than steel but much lighter.鈥�
The material, when used as a car body shell, could increase an electric car鈥檚 range by 25%, meaning a 200 miles per charge vehicle could go an extra 50 miles and reduce its overall weight.
As a supercapacitor, it also would boost an electric car鈥檚 power, giving it the extra push it needs to go from zero to 60 mph in 3 seconds.
鈥淭his application, as well as many others, could be on the horizon one day as the technology advances in its readiness level,鈥� says Luke Roberson, study co-author and a senior principal investigator for research and development at NASA鈥檚 Kennedy Space Center.
These materials could be employed as frames for cube satellites, structures on off-world habitats, or even as part of futuristic eyewear, such as mixed and virtual reality headsets.
鈥淭here are lots of potential infusion points within the economy as well as for future space exploration,鈥� Roberson says. 鈥淭his is, in my mind, a huge advancement of the technology readiness level to get us to where we need to be for NASA mission infusion.鈥�
On cars, the supercapacitor composite material would get its power through charging, like a battery, as well as when the car brakes, Thomas says.
鈥淚ts charge-discharge cycle life is 10 times longer than an electric car battery,鈥� he says.
The materials used are also nontoxic and nonflammable, which is very important for passenger safety in case of an accident, he says.
鈥淭his is a huge improvement over past approaches that have suffered from issues with toxic material, flammable organic electrolytes, low life cycles or poor performance,鈥� Thomas says.
Due to its unique design that uses multiple layers of carbon fiber, the material has significant impact and bending strength, essential for withstanding an auto collision, as well as significant tensile strength.
To construct the material, the researchers created positively and negatively charged carbon fiber layers, that when stacked and attached in an alternating pattern, create a strong, energy-storing composite.
Nanoscale graphene sheets attached on the carbon fiber layers allow for increased charge storing ability, while metal oxides deposited on attached electrodes enhance voltage and provide higher energy density. This provides the supercapacitor-battery hybrid with its unprecedented energy storage ability and charging life cycle, Thomas says.
Deepak Pandey, the study鈥檚 lead author and a doctoral student in Thomas鈥� lab, worked on forming, shaping and optimizing the composite, as well as developing the method to add metal oxides to the carbon graphene strips.
Study co-author Kowsik Sambath Kumar, a doctoral student in Thomas鈥� lab, developed a way to vertically align nanoscale graphene on carbon fiber electrodes.
Kumar says one of the most important developments from this supercapacitor composite is that it is lightweight.
鈥淣ow in electric cars, the battery is 30% to 40% of the weight,鈥� he says. 鈥淲ith this energy storing composite we can get additional mileage without increasing the battery weight, further it reduces the vehicle weight, while maintaining high tensile, bending and impact strength. Whenever you decrease that weight, you can increase the range, so this has huge applications in electric cars and aviation.鈥�
Pandey agrees and highlights its usefulness for the space sector.
鈥淢aking a cubic satellite out of this composite will make the satellite light in weight and will help to eliminate the heavy battery pack,鈥� he says. 鈥淭his could save thousands of dollars per launch. Further, free volume gained by removal of big batteries could help pack in more sensors and testing equipment, increasing the functionality of satellite,鈥� Pandey says. 鈥淪upercapacitor-battery hybrid behavior is ideal for cubesats since it can charge in minutes when a satellite orbits over the solar-lit side of the Earth.
Roberson says the technology is currently at a technology readiness level of five, which means it has been tested in a relevant environment before moving to being tested in a real environment, such as on a space flight, which would be level six testing.
To pass the last level of testing, level nine, and reach the commercial environment, it will require further development and testing focused on commercial applications, he says.
Study co-authors also included Leaford Nathan Henderson, a doctoral student in materials science and engineering at 麻豆原创; Gustavo Suarez, an undergraduate student in aerospace engineering at 麻豆原创; Patrick Vega, a research assistant in the NanoScience Technology Center during the time of the study; and Hilda Reyes Salvador 鈥�20, a graduate of 麻豆原创鈥檚 biomedical sciences undergraduate program.
The research was funded by the U.S. National Science Foundation.
Thomas joined 麻豆原创 in 2011 and is a part of the NanoScience Technology Center with a joint appointment in the and the Department of Materials Science and Engineering in the College of Engineering and Computer Science. Previously, Thomas was at the University of Arizona in its College of Optical Sciences. He has several degrees including a doctorate in chemistry/materials science from Cochin University of Science and Technology in India.
